The primary consideration for wiring outdoor LED lighting fixtures is the usage environment. There are many factors to consider in the field, such as dust prevention, temperature resistance, and aging resistance. The cable connection is not well protected, which may cause many accidents during use, so protective measures are usually taken in normal circumstances.

Our high-power LED floodlights are mostly used in various outdoor environments, such as under trees, bushes, and by water pools in landscaping. Therefore, how can we ensure the water resistance of the wiring of outdoor LED floodlights in these humid and rainy environments? Firstly, the standard protection level of our lighting fixtures is IP65-IP68, which means they have the function of dust and rain prevention, but cannot reach the level of immersion in water. Therefore, we need to pay attention to the installation. The exposed wiring is usually directly connected to the main line on site, and the outgoing wire of the lighting fixture is generally 30-50cm long. How to ensure water resistance and leakage resistance after connecting to the main line connector? Our engineering solutions include:

1. Install a waterproof junction box in the junction box at the wiring position after threading the daily line pipe, which can provide dual protection.

2. The simple method is to first use insulating tape to wrap the joint at the wiring joint, then use waterproof tape to wrap it, and then wrap a layer of insulating tape. This is generally reliable in the field;

3. Select a wiring connector, tighten the connector at both ends inside the connector, and generally, the protection level of the water resistant connector can also reach IP67 or above.

Article source: Zhongshan LED Lamp Manufacturer Www.mingsongled.com